horiba U-51, Инструкция по эксплуатации

Страница: 90 / 141

3 Basic Operation
66
3.5 Data operations
Use the procedures below to retrieve data stored in memory, delete all the data, check the
remaining data memory capacity, and check the calibration record.
3.5.1 Displaying data
For maximum efficiency, there are 3 methods of displaying data.

Displaying the data for a specified site

Displaying the data for a specified date/time

Displaying all the data
Use the method that best suits your requirements.

Displaying the data for a specified site
1.
Press the control unit’s POWER key for about 1 second to turn the power ON.
The "MEASUREMENT" screen appears after about 10 seconds.
Note
The operation keys are designed to operate using the pad of a finger, sharp objects can tear the
control unit cover damaging the operation keys.
2.
Press the right (

) key 3 times to display the "DATA OPERATION" screen.
3.
Press the down (

) key to move the cursor to "View Data", then press the ENTER
key.
4.
Move the cursor to "Site", then press the ENTER key.
5.
Press the up (

), down (

), left (

) and right (

) keys to enter the site to retrieve.