horiba U-51, Инструкция по эксплуатации

Страница: 17 / 141

Product Handling Information
Operational precautions
Use of the product in a manner not specified by the manufacturer may impair the protection
provided by the product. And it may also reduce product performance.
Exercise the following precautions:

General

Only use the product including accessories for their intended purpose.

Sensor probe

After seawater measurement, promptly wash the sensor probe thoroughly in water.

Do not immerse the sensor probe in alcohol, organic solvent, strong acid, strong alkaline,
and other similar solutions.

Do not subject to strong shocks.

Do not perform measurement in environments of magnetic fields. Measurement errors
may result.

The sensor probe is no longer waterproof when the sensors are not mounted.

Does not support measurement of samples containing fluorine.

Do not mistake the combination of sensor probe and turbidity sensor.

To disconnect the sensor cable or interface cable, pull them out with holding the
connector part. Do not pull the cable part; it may cause breakage.

Sensor probe of U-54 and U-54G cannot be used with the conventional control unit.
Unusable control units are following version.
P2000266001D, P2000266001C, P2000266001B, P2000266001A, P2000266001-
To confirm the version, see "

Version" (page 35).
Appearance of mounted sensors
Connector part