horiba U-51, Инструкция по эксплуатации

Страница: 49 / 141

3 Basic Operation
25
3.2.4 Sensor selection
Note
Measurement parameters can only be selected when the sensor probe is connected.
You can set between 1 and 11 measurement parameters to display in the control unit screen.
Follow the steps below to select the desired measurement parameters.
1. Press the control unit’s POWER key for about 1 second to turn the power ON.
The "MEASUREMENT" screen appears after about 10 seconds.
Note
The operation keys are designed to operate using the pad of a finger, sharp objects can tear the
control unit cover damaging the operation keys.
2.
Press the right (  ) key to switch the display to the "SETTINGS" screen.
3. Press the down (  ) key to move the cursor to "Sensor selection", then press the
ENTER key.
A list of the measurement parameters that can be set and the currently set units are
displayed.
4.
Move the cursor to each measurement parameter to change, then press the ENTER
key.
A check in the check box of a measurement parameter indicates it will be displayed.
5.
To save the changes, press the up (

), down (

), left (

) and right (

) keys to
move the cursor to SAVE, then press the ENTER key. If you don’t want to save the
changes, press the ESC key.
Note
Available measurement parameters differ according to product specifications.