3 Basic Operation
36
4.
Press the down (
) key to move the cursor to "Version", then press the ENTER key.
The program No. of the control unit and sensor probe software appears.
Setting the date/time
Follow the steps below to set the date and time.
1.
Press the control unit’s POWER key for about 1 second to turn the power ON.
The "MEASUREMENT" screen appears after about 10 seconds.
Note
The operation keys are designed to operate using the pad of a finger, sharp objects can tear the
control unit cover damaging the operation keys.
2.
Press the right (
) key to switch the display to the "SETTINGS" screen.
3.
Press the down (
) key to move the cursor to "System", then press the ENTER key.
4.
Press the down (
) key to move the cursor to "Date/time", then press the ENTER
key.
5.
Move the cursor to the date, then press the ENTER key.
6.
Press the right (
) key to move the cursor to the year, month, day, hour, minute and
second, and press the up (
) and down (
) keys to enter each value.
Содержание U-51
Страница 1: ...CODE GZ0000230552H ...
Страница 24: ......
