ID61/62 Series Panel - Installation, Commissioning & Configuration Manual
Configuration Mode
56
997-457-000-8, Issue 8
January 2010
[Setup]
PIN Change complete
<: Exit
3
If required, press the ‘
6
’ button to select DISABLED.
4
Press ‘
4
’ to return to the Peripheral Options menu
screen.
5.5.4.9 GSM Communications Module Event Messaging
The ID61/62 Series panels are now able to be configured
for use with a GSM Communications Module (GCM) (panel
software version 5.07, or later). This function is selected
through the RS232 Protocol option screen. The available
options are: changing the GSM PIN number; entry of up
to five GSM network telephone numbers and selecting
panel event categories for text message notification.
1
From the Setup menu screen, press the ‘
2
’ button
on the numeric keypad to select the RS232
Communications port option. The RS232 Protocol
setup screen is displayed. The PRINTER (default)
option is displayed first. Press the ‘
6
’ pushbutton twice
to select the GSM MODEM RS232 protocol option:
2
Press the ‘
2
/
8
’ pushbuttons to display more
configuration options for the GSM. The editable
options are: GSM PIN Number (to enable a change
of PIN number) and discrete GSM edit screens which
allow up to 5 GSM network numbers to be configured
to receive event messages from the ID61/62 Series
fire alarm control panels.
3
To change the GSM PIN number, press the ‘
6
’
pushbutton and the screen asks for the current PIN
to be entered (this is provided with the SIM card):
4
Using the numeric keypad enter the new PIN number
and press ‘
5
’ when finished. You will now be prompted
to enter the new PIN number again as confirmation:
If the GSM PIN number change was successful you
will get the following message:
6
[Setup]
Data Link Monitoring =
DISABLED
> : Change
¦
: More
< : Exit
[Setup]
RS232 Protocol = GSM MODEM
> : Change
¦
: More
< : Exit
[Setup]
Change GSM PIN Number:
> : Change
¦
: More < : Exit
[Setup]
Enter current PIN : _
<: Exit
[Setup]
Confirm new PIN : _
<: Exit
5
6
2
and
6
or
8
2
