Honeywell HX3 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 230

Honeywell HX3 Скачать руководство пользователя страница 69

5 - 29

Keyboard

Start > Settings > Control Panel > Keyboard

Set keypad key map, keypad key repeat delay, and key repeat rate.

Select a key map using the drop-down list. Adjust the character repeat settings and tap the OK button to save the changes.

When new key maps, or fonts, are added to the registry, they are available immediately and the font name is in the Key-
board Properties Key map dropdown list. Only one font at a time can be selected. The fonts affect the screen display, they
do not affect any virtual (touch screen) key taps.

Languages

Loads are available in the following languages (in separate part numbers) for each language: Simplified Chinese, Tra-
ditional Chinese, Korean, Japanese. Tahoma font is on every unit and includes English (default), European (French,
Spanish, German, Portuguese), Scandinavian languages, Arabic, Cyrillic, Greek, Hebrew, and Thai.

Setting

Default

Key map

Default (or Default HX3)

Repeat charac-
ter

Enable

Repeat Delay

Short

Repeat Rate

Slow

«
...
67
68
69
70
71
...
»

Содержание HX3







































































































































































































































Отзывы:

Нет отзывов