Honeywell HX3, Руководство пользователя, Страница: 100 / 230

6 - 8
Reconnect Panel
Due to the headless design of the HX3, all Bluetooth dialog pop-up boxes are suppressed by default, even when the HX3 is
viewed with LXEConnect. The dialog pop-ups may be enabled for viewing with a remote management tool such as LXE-
Connect. However, to preserve battery life, the dialog pop-ups should be turned off when the HX3 is not being viewed with
a remote management utility.
Note: These options can still be checked or unchecked whether Bluetooth connection is enabled or disabled.
Settings
Report when connection lost
This option is Disabled by default. There may be an audio or visual signal when a connection between a paired,
active device is lost. A visual signal may be a dialog box placed on the display notifying the user the connection
between one (or all) of the paired Bluetooth devices has stopped. Tap the ok button to remove the dialog box from
the screen.
Report when reconnected
This option is Disabled (unchecked) by default. There may be an audio or visual signal when a connection
between a paired, active device is made. A visual signal may be a dialog box placed on the display notifying the
user the connection between one (or all) of the paired Bluetooth devices has resumed. Tap the ok button to
remove the dialog box from the screen.
Report failure to reconnect
This option is Disabled by default. The default time delay is 30 minutes. This value cannot be changed by the
user. There may be an audio or visual signal when a connection between a paired, active device fails to re-con-
nect. A visual signal may be a dialog box placed on the display notifying the user the connection between one (or
all) of the previously paired Bluetooth devices has failed. Tap the X button or ok button to close the dialog box.
Possible reasons for failure to reconnect: Timeout expired without reconnecting; attempted to pair with a device
that is currently paired with another device; attempted to pair with a known device that moved out of range or was
turned off; attempted to pair with a known device but the reason why reconnect failed is unknown.
Clear Pairing Table on Boot
This option is Disabled (unchecked) by default. When enabled (checked), all previous paired information is
deleted upon any reboot sequence and no devices are reconnected. When enabled (checked) “Auto Reconnect
on Boot” is automatically disabled (dimmed).
Auto Reconnect on Boot
This option is Enabled (checked) by default. All previously paired devices are reconnected upon any reboot
sequence. When disabled (unchecked), no devices are reconnected upon any reboot sequence.