Honeywell HX3 Скачать руководство пользователя страница 180

Страница: 180 / 230

9 - 28

10. To use Sign-On credentials:

• Do not enter a User and Password as the user will be prompted for the Username and Password when connecting

to the network.

11. To use Stored Credentials:

• Enter the Domain\Username (if the Domain is required), otherwise enter the Username.

• Enter the password.

12. To use Automatic PAC Provisioning no additional entries are required.

13. To use manual PAC Provisioning:

• Enter the PAC Filename and PAC Password.

• The PAC file must be copied to the directory specified in the Certs Path global variable. The PAC file must not be

read only.

14. Tap OK then click the Commit button.

15. Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU Main tab shows the device is

associated after the radio connects to the network.

Содержание HX3







































































































































































































































Результаты поиска

Содержание HX3

Отзывы:

Honeywell HX3, Руководство пользователя, Страница: 180 / 230

Результаты поиска

Содержание HX3

Отзывы: