Honeywell HX3 Скачать руководство пользователя страница 149 | Manualshive

Страница: 149 / 230

Honeywell HX3 Скачать руководство пользователя страница 149

8 - 21

Startup/Shutdown

For best results, use AppLock to manage the taskbar. AppLock is not available on the HX3.

If the Startup/Shutdown tab is not present on the Enabler installed on your device, see the equivalent options on the

(page 8-10) ta b and the

(page 8-12) tab.

Do not monitor or launch Enabler

When the device boots, do not launch the Enabler application and do not attempt to connect to the Mobile Device
Server.

Monitor for updates

Attempt to connect to the Mobile Device Server and process any updates that are available. Do not launch the Enabler
application.

Monitor and launch Enabler

Attempt to connect to the Mobile Device Server and process any updates that are available. Launch the Enabler
application.

Manage Taskbar (Lock or Hide)

Note the dimmed options. The Enabler can restrict user access to other applications when the user interface is
accessed by either locking or hiding the taskbar.

Program Shutdown (Continue or Stop monitoring)

The system administrator can control whether the Enabler continues to monitor the Mobile Device Server for updates
once the Enabler application is exited.

«
...
147
148
149
150
151
...
»

Содержание HX3







































































































































































































































Отзывы:

Нет отзывов