Honeywell HX3 Скачать руководство пользователя страница 153 | Manualshive

Страница: 153 / 230

Honeywell HX3 Скачать руководство пользователя страница 153

9 - 1

9

Wireless Network Configuration

Introduction

Although the HX3 has no display or alphanumeric keypad, HX3 control panels can be viewed and parameters manipulated
using LXEConnect and ActiveSync on a connected host computer.

Note: The HX3 does not have a touch screen. If the host computer has a touch screen, instructions using “tap” and “stylus”

instead of “click” and “mouse” apply.

Note: The Summit client device is either an 802.11g radio, capable of both 802.11b and 802.11g data rates or an 802.11a radio,

capable of 802.11a, 802.11b and 802.11g data rates. The radio can be configured for no encryption, WEP encryption or
WPA security.

Security options supported are:

•

•

•

•

•

•

•

•

•

Important Notes

After making any changes to the wireless configuration, warmboot the HX3.

Summit Client Utility

Note: When making changes to profile or global parameters, the device should be warmbooted afterwards.

Select the Summit Client Utility using the Start button or tap the Summit Tray Icon (if present).

The

(page 9-3) provides information, admin login and active profile selection.

Profile specific parameters are found on the

(page 9-5) The parameters on this tab can be set to unique values for

each profile. This tab was labeled Config in early versions of the SCU.

The

(page 9-9) contains information on the current connection.

The

(page 9-10) provides utilities to troubleshoot the radio.

Global parameters are found on the

(page 9-11). The values for these parameters apply to all profiles. This tab was

labeled Global Settings in early versions of the SCU.

It is important that all dates are correct on the HX3 and host computers when using any type of certificate.
Certificates are date sensitive and if the date is not correct authentication will fail.

It may be necessary to upgrade radio software in order to use certain Summit Client Utility (SCU) features. Contact

Customer Support

(page 14-1) for details.

When using the 802.11a radio, the U-NII 1 band is the preferred band for indoor operation. For regulatory domains
in which the U-NII 3 band is allowed, the following channels are supported: 149, 157 and 161. The AP must be
configured accordingly.

!
!
!

«
...
151
152
153
154
155
...
»

Содержание HX3







































































































































































































































Отзывы:

Нет отзывов