Honeywell HX3 Скачать руководство пользователя страница 184

Страница: 184 / 230

9 - 32

Certificates

Note: Refer to the Security Primer (available on the Honeywell web site) to prepare the Authentication Server and Access Point

for communication.

Note: It is important that all dates are correct on the HX3 and host computers when using any type of certificate. Certificates

are date sensitive and if the date is not correct authentication will fail.

Root Certificates are necessary for EAP-TLS, PEAP/GTC and PEAP/MSCHAP.

1. See

Generating a Root CA Certificate

(page 9-32) and download the certificate to a host computer.

2. Connect the HX3 to the a host computer using ActiveSync and copy the certificate to the HX3 \System folder.

3. Install the Root CA Certificate, see

Installing a Root CA Certificate

(page 9-35).

4. User Certificates are necessary for EAP-TLS.

1. See

Generating a User Certificate

(page 9-36) and download the User Certificate and Private Key file to a host computer.

2. Connect the HX3 to the host computer using ActiveSync and copy the certificate and private key file to the HX3 \System

folder.

3. See

Installing a User Certificate

(page 9-41) and install the User Certificate and Private Key file.

4. After installation, perform a Suspend/Resume.

Verify Installation

(page 9-44).

Generating a Root CA Certificate

Note: It is important that all dates are correct on the HX3 and host computers when using any type of certificate. Certificates

are date sensitive and if the date is not correct authentication will fail.

The easiest way to get the root CA certificate is to use a browser on a PC to navigate to the Certificate Authority.

1. To request the root CA certificate, open a browser to http://<CA IP address>/certsrv.

2. Sign into the CA with any valid username and password.

Содержание HX3







































































































































































































































Результаты поиска

Содержание HX3

Отзывы:

Honeywell HX3, Руководство пользователя, Страница: 184 / 230

Результаты поиска

Содержание HX3

Отзывы: