Honeywell HX3, Руководство пользователя, Страница: 14 / 230

1 - 2
Laser Warnings
• Do not look into the laser’s lens.
• Do not stare directly into the laser beam.
• Do not remove the laser caution labels from the tethered ring bar code decoder.
• Do not connect the laser bar code aperture to any other device. The laser bar code aperture is certified for use with the HX3
only.
If the following label is attached to your product, it indicates the HX3 tethered ring bar code decoders contain an engine with a
laser aimer:
Laser Safety Statement
This device has been tested in accordance with and complies with IEC60825-1:2007 and EN60825-1:2007). Complies with 21
CFR 1040.10 and 1040.11, except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
LASER LIGHT, DO NOT STARE INTO BEAM, CLASS 2 LASER PRODUCT, 1.0 mW MAX OUTPUT: 630-680nM.
Caution:
Laser radiation when open. Read the caution labels. Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
!