manualshive.com logo in svg

Honeywell HX3, Руководство пользователя, Страница: 228 / 230

Поделиться
Скачать
Honeywell HX3 Скачать руководство пользователя страница 228

14 - 2

All provisions of this Limited Warranty are separate and severable, which means that if any provision is held invalid and 
unenforceable, such determination shall not affect the validity of enforceability of the other provisions hereof.  Use of any 
peripherals not provided by the manufacturer may result in damage not covered by this warranty.  This includes but is not limited 
to: cables, power supplies, cradles, and docking stations.  HII extends these warranties only to the first end-users of the 
products.  These warranties are non-transferable.

Limited Warranty Duration

Note: The HX3 is docked in a HX2-labeled Desktop Cradle.  HX3 batteries are re-charged using a HX2-labeled cradle and a 

HX2-labeled Battery Charger.

The duration of the limited warranty for the HX3 is 1 year.

The duration of the limited warranty for the HX3 Desktop Cradle is 1 year.

The duration of the limited warranty for the HX3 Battery Charger is 1 year.

The duration of the limited warranty for the HX3 2000mAh Li-Ion and 4000mAh Li-Ion Battery is 6 months.

The duration of the limited warranty for the HX3 Ring Scanner and Ring Imager is 1 year.

The duration of the limited warranty for the HX3 AC power supply and cables is 1 year.

The duration of the limited warranty for the HX3 cables (USB, Serial, Communication, Power) is 1 year.

The duration of the limited warranty for the HX3 fabric accessories (e.g., belt, case, straps) is 90 days.

The duration of the limited warranty for the HX3 headset is 1 year.

Содержание HX3







































































































































































































































Отзывы:

Нет отзывов