Honeywell HX3 Скачать руководство пользователя страница 151

Страница: 151 / 230

8 - 23

Step 2: Scan Bar Codes

For each mobile device to be configured, follow these instructions.

1. Start eXpress Scan on the HX3 by double clicking the eXpress Scan icon.

2. Enter the bar code password, if any.

3. Click Start.

4. Bar code 1 must be scanned first. The scanned data is displayed in the “Data” text box. The password, if any, entered

above is compared to the password entered when the bar codes were created.

5. If the passwords match, the bar code data is processed and the screen is updated to reflect the number of bar codes

included in the set.

6. If the passwords do not match, an error message is displayed. The current screen can be closed using the X box in the

upper right corner. The password can be re-entered and Bar Code 1 scanned again.

Содержание HX3







































































































































































































































Результаты поиска

Содержание HX3

Отзывы:

Honeywell HX3, Руководство пользователя, Страница: 151 / 230

Результаты поиска

Содержание HX3

Отзывы: