manualshive.com logo in svg

Honeywell HX3, Руководство пользователя, Страница: 202 / 230

Поделиться
Скачать
Honeywell HX3 Скачать руководство пользователя страница 202

11 - 4

Desktop Cradle Footprint

Table Mounting

The cradle can be mounted to a flat, stable surface using the <1mm hole in the Tethered Ring Scanner storage bay (fasteners, 
screwdrivers, etc., not supplied).

Periodically check the connection and re-tighten if necessary.

Power Cable

Important:  Use the power cable provided with the cradle’s power supply adapter with the desktop cradle only.

There are two types of external power supplies for the cradle:

•

Power Supply, External, AC, US (with power cable)

•

Power Supply, External AC, International (without power cable)

The external power supply may be connected to either a 120V, 60Hz supply or, outside North America, to a 230V, 50Hz supply, 
using the appropriate detachable cord set.

In both cases, connect the external power supply 2-prong end to a source of power provided with maximum 15 Amp over cur-
rent protection (10 Amp for 230V circuits).

1.

Firmly press the cradle end (L-shaped 5mm barrel connector) of the power cable into the power connector on the back of 
the cradle.

2.

Firmly press the C8-2 female end of the power cable into the two male connector pins on the power adapter, guided by the 
connection notches on the top and bottom.

3.

Plug the 2-prong end of the cable into any AC wall outlet with a dependable power source.  AC power is now being supplied 
to the AC/DC power adapter and the cradle.

Bottom View – Measurements are Not to Scale

Approximations

1.

5.5 in / 14 cm

2.

2.0 in / 5.1 cm

3.

2.0 in / 5.1 cm

4.

0.45 in / 1.14 cm

5.

5.5 in / 14 cm

6.

6.0 in / 15.2 cm

7.

2.5 in / 6.3 cm

Cradle Height: 3.4 in / 8.6 cm
Cradle Width: 4.75 in / 12.1 cm
Cradle w/Tethered Battery Height: 6 in / 15 cm 

Содержание HX3







































































































































































































































Отзывы:

Нет отзывов