Honeywell HX3, Руководство пользователя, Страница: 29 / 230

2 - 11
Setting up the Software on the HX3
Note: Although the HX3 has no display or alphanumeric keypad, HX3 operating system screens can be viewed and parameters
manipulated using LXEConnect and ActiveSync on a connected host computer.
1. ActiveSync or Windows Mobile Device Center must be installed on a host computer with a USB port.
2. Connect the assembled HX3 to the host computer using the USB-Client cable.
3. Press the Power key on the HX3. The LEDs begi n to flash. Beeps may be heard from the speaker.
4. Copy LXEConnect setup files from the HX3 to the host computer, if necessary.
5. Launch LXEConnect on the host computer.
The next screen displayed on the host computer is the HX3 Startup page. Use the host computer mouse and keyboard to
explore and manipulate control panel settings on the HX3.
If the first screen displayed on the host computer is the HX3 End User Licensing Agreement, click the Accept button to accept
the EULA. The HX3 proceeds to start up and the System LEDs begin to flash.
HX3 LEDs
LEDs (Light Emitting Diodes) are grouped together at the top left on the front of the HX3. They are:
System Status LED (located on the right in the group of three LEDs) indicates power management status.
• Wireless Activity LED (located on the left in the group of three LEDs).
• Bluetooth Status LED (located in the middle of the group of three LEDs) indicated Bluetooth client functions.
System Status LED
Bluetooth Status LED
Wireless Activity
Blinking Red Main battery power fail; critical suspend mode
Steady Red Main battery low. If the main battery is not replaced with a fully charged battery before
the internal battery fails, the HX3 is turned Off.
Blinking Green The HX3 is On and attached to either a battery with a good charge or to an external
power source.
Steady Green The HX3 is booting up.
Off HX3 is Off (both batteries depleted) or the HX3 is in Suspend mode
Blinking Slowly Bluetooth is paired but not connected to a device.
Blinking Medium Bluetooth is paired and connected to a device.
Blinking Fast Bluetooth is discovering Bluetooth devices.
Off Bluetooth hardware has been turned off or it does not exist in the HX3.
Flickering Amber HX3 is booting up.
Steady Amber The HX3 is connected to a wireless network.
Off The HX3 has not connected to a wireless network.