Honeywell FlexLine SmartServo 954, Руководство по обслуживанию

Страница: 158 / 304

COMMISSIONING
150 Service Manual Part No.: 4417340 Revision 1
954 SmartServo FlexLine
All the HART
universal commands
and some
common practice
commands
are supported by HCI-HAO. These are listed in the below
tables.
HART Universal Ccommands
Command no. Description
0 Read Unique Identifier
1 Read Primary Variable
2 Read Loop Current and Percentage of Range
3 Read Dynamic variables and Loop Current
4 Reserved
5 Reserved
6 Write Polling Address
7 Read Loop Configuration
8 Read Dynamic Variable Classifications
9 Read Device Variable With Status
10 Reserved
11 Read Unique Identifier Associated with Tag
12 Read Message
13 Read Tag, Descriptor, Date
14 Read PV Sensor Information
15 Read Device Information
16 Read Final Assembly Number
17 Write Message
18 Write Tag, Descriptor, Date
19 Write Final Assembly Number
20 Read Long Tag
21 Read Unique Identifier Associated With Long Tag
22 Write Long Tag
HART Common Practice Commands
Command no. Description
34 Write Primary Variable Damping Value
35 Write Primary Variable Range Values
36 Set Primary Variable Upper Range Value
37 Set Primary Variable Lower Range Value
38 Reset Configuration Changed Flags
40 Enter / Exit Fixed Current Mode
41 Perform Self Test
42 Perform Device Reset
44 Write Primary Variable Units
48 Read Additional Device Status
53 Write Device Variable Units
72 Squawk