Hog Technologies Stripe Hog SH5000, Руководство по эксплуатации

Страница: 108 / 122

108
CheckLists
1. Shutdown High Pressure by turning OFF the Dump Valve switch.
2. Allow the vacuum blower to operate for a couple of minutes after shutting down
the high pressure and charge water pumps to clear waste water from hoses and
dry out blower system.
3. Raise the Hog Head to the full “UP” and locked position.
4. Reduce the engine speed to idle.
5. Press the clutch pedal and disengage the transmission PTO.
6. Put the Truck Transmission in “N”
(NEUTRAL) .
7. Turn the PTO and Charge Pump switches to “OFF”.
8. Turn all other switches and dials on the control panels to “OFF” or “0”.
9. Make sure the Hog Arm locking lever is engaged and secure it with a safety strap
to ensure the locking lever cannot accidentally be released during transportation.
IT IS VERY IMPORTANT THAT BOTH PTO SWITCHES ARE FULLY DISENGAGED TO ENSURE
THAT NONE OF THE FUNCTIONS WILL OPERATE ACCIDENTALLY.
8. Drain waste water from the vacuum canister. Close the valve when draining is
complete.
9. When the truck is parked, set the parking brake and allow the engine to run for
several minutes to cool internal components, then shut off the engine.
Warm Weather Shutdown Warm Weather Shutdown