Hog Technologies Stripe Hog SH5000, Руководство по эксплуатации

Страница: 60 / 122

60
General Maintenance
Passenger Side Lubrication Points
A. Grease Hydraulic Lift Cylinder Hinge Pins D. Lubricate All Ball Valves
B. Lubricate Tool Box Hinges and Latches E. Grease Blower Pulley End Bearings
C. Grease Pulley Pillow Block Bearings F. Lubricate Vacuum Canister Hinges and Latches
C
B
D
E
F
Refer to the Lubrication Chart in this section for
lubrication specifications
Weekly:
• Check fluid level in the OMSI Drive and inspect
for signs of leakage. The fluid level is checked
by removing the plug on the drivers side rear
of the OMSI Drive. The fluid level should be
maintained within .5” (1.3 cm) of the plug
threads. Refer to the pictures in this section
for the fluid level plug location and add fluid
as required.
• Inspect components for loose bolts and uni-
versal joints.
Periodic Maintenance:
• Grease drive shaft splines and universal joints
monthly.
• Change fluid in OMSI Drive components as
recommend in the operators manual.
OMSI Drive Gearbox-Fluid Level Plug Location
A