Hog Technologies Stripe Hog SH5000, Руководство по эксплуатации

Страница: 53 / 122

53
Section 4:
Stripe Hog Operation
4.1 Emergency Shutdown
Truck Emergency Shutdown
1. PRESS THE BRAKE PEDAL TO DISENGAGE REMOTE
ENGINE CONTROL AND DROP ENGINE RPM TO IDLE SPEED.
2. IMMEDIATELY DEPRESS THE CLUTCH, PUT TRUCK
TRANSMISSION IN “N” (NEUTRAL) AND SHUTDOWN THE
ENGINE. THIS WILL INSTANTLY SUSPEND OPERATIONS
OF THE ENTIRE SYSTEM.
3. WHEN THE SITUATION PERMITS, RETURN ALL SWITCHES
TO THE “OFF” POSITION AND ALL DIALS TO THE “0”
SETTING.
4.2 SH5500 Start Up/Shutdown
Before operating the Stripe Hog check the fluid
levels in the truck engine, transmission and hy-
draulic system. A thorough understanding of
the component systems and their operation is
Control Panel and Joystick
essential to the proper operation the Stripe Hog.
This manual and the associated manufacturers’
information is provided to enhance your knowl-
edge of the Stripe Hog. Make sure you have read
them carefully and fully understand the operation
of the unit.
You should walk around the unit and visually
inspect the Hog Head, high pressure hoses, hy-
draulic hoses, vacuum hoses, and all waterblasting
system components for obvious signs of leaks,
wear and deterioration. Do not operate the unit
until all questionable components are repaired or
replaced.
The startup and shutdown procedures described in
this section are for a typical truck chassis equipped
with a manual transmission. This information is
provided as a general guide and overview of the
process for educational purposes. The exact pro-
cedure for your truck may be different, depending
on the chassis and options selected. Hog Tech-