Hog Technologies Stripe Hog SH5000, Руководство по эксплуатации

Страница: 67 / 122

67
General Maintenance
Typical Bilge Pump and Sump Box
Bilge Pump
The bilge pump returns packing cooling and lube
water from the UHP pump to the debris tank. It
is a centrifugal pump that requires little mainte-
nance. It can run dry for short periods without
damage, but prolonged dry operation will cause
the seals to overheat and damage the pump.
Information and owner’s manuals for the bilge
drain system components are included with this
manual. Refer to this information for additional
operation and service data.
Inspection and Routine Maintenance:
Daily:
• Inspect the cooling water sump in the UHP
pump daily and clean any debris that may
restrict drainage to the bilge pump system.
• Inspect the drain hoses and sump system for
loose fittings and leaks daily.
• The bilge pump is activated by an automatic
float switch in the drain sump. Monitor the
operation of the bilge pump system at the
start of each shift to make sure the pump and
automatic switch are operating properly.
Periodic:
• Remove the lid for the bilge drain sump box
and clean debris that may reduce drainage to
the bilge pump or interfere with the operation
of the float switch weekly.
Sump
Box
Bilge
Pump