manualshive.com logo in svg

Hitachi SJ700B SERIES, Инструкция по эксплуатации

Инструкция по эксплуатации для серии Hitachi SJ700B - бесплатно скачать с manualshive.com. Ознакомьтесь с подробным руководством по эксплуатации этого продукта, чтобы оптимизировать его использование. Не упустите возможность загрузить руководство прямо сейчас на manualshive.com.

Поделиться
Скачать
background image

Chapter 7 Specifications 

 

7 - 2 

(2) Specifications of the 400 V class models (continued) 

Model name (type name) 

SJ700B

-□□□

HFF

 

055 075 110 150 185 220 300 370 450 

550 

Input

 

Fre-

 

quency 

setting 

Standard 
operator 

Setting with 

1 

and

2 

keys 

External 

signal 

0 to +10 VDC, -10 to +10 VDC (input impedance: 10k

Ω

), 4 to 20 mA (input impedance: 100

Ω

) (note6) 

External port  Setting via RS485 communication 

S

tart/stop 

command 

Forwa

rd/r

e

v

e

rs

e 

command 

Standard 

operator 

Start/stop commands (forward/reverse switching by parameter setting) 

External 

signal 

Forward-operation start/stop commands (reverse-operation start/stop possible when relevant commands are assigned 
to intelligent input terminals) 

3-wire input possible (when relevant commands are assigned to control circuit terminals) 

External port 

Setting via RS485 communication 

Intelligent input 

terminals 

8 terminals, NO/NC switchable, sink logic/source logic switchable
[Terminal functions] Select eight of 69 functions. 

Reverse operation (RV), Multispeed 1 setting (CF1), Multispeed 2 setting (CF2), Multispeed 3 setting (CF3), Multispeed 
4 setting (CF4), Jogging (JG), external DC braking (DB), 2nd motor control (SET), 2-stage acceleration/deceleration 
(2CH), free-run stop (FRS), external trip (EXT), unattended start protection (USP), commercial power supply switching 
(CS), software lock (SFT), analog input switching (AT), 3rd motor control (SET3), reset (RS), starting by 3-wire input 
(STA), stopping by 3-wire input (STP), forward/reverse switching by 3-wire input (F/R), PID disable (PID), PID 
integration reset (PIDC), control gain switching (CAS), acceleration by remote control (UP), deceleration by remote 
control (DWN), data clearance by remote control (UDC), forcible operation (OPE), multispeed bit 1 (SF1), multispeed 
bit 2 (SF2), multispeed bit 3 (SF3), multispeed bit 4 (SF4), multispeed bit 5 (SF5), multispeed bit 6 (SF6), multispeed bit 
7 (SF7), overload restriction selection (OLR), torque limit selection (enabling/disabling) (TL), torque limit 1 (TRQ1), 
torque limit 2 (TRQ2), P/PI switching (PPI), braking confirmation (BOK), orientation (ORT), LAD cancellation (LAC), 
clearance of position deviation (PCLR), permission of 90

°

-shift phase (STAT), trigger for frequency addition (A145) 

(ADD), forcible-terminal operation (F-TM), permission of torque command input (ATR), cumulative power clearance 
(KHC), servo-on (SON), pre-excitation (FOC), general-purpose input 1 (MI1), general-purpose input 2 (MI2), 
general-purpose input 3 (MI3), general-purpose input 4 (MI4), general-purpose input 5 (MI5), general-purpose input 6 
(MI6), general-purpose input 7 (MI7), general-purpose input 8 (MI8), analog command holding (AHD), multistage 
position settings selection 1(CP1), multistage position settings selection 2(CP2), multistage position settings selection 
3(CP3), Zero-return limit function(ORL), zero-return trigger function(ORG), forward drive stop(FOT), reverse drive 
stop(ROT), speed / position switching(SPD), pulse counter(PCNT), pulse counter clear(PCC), no assignment (no) 

Thermistor input 

terminal 

1 terminal (positive temperature coefficient/negative temperature coefficient switchable for resistor) 

Output

 

Intelligent output 

terminals 

5 open-collector output terminals, NO/NC switchable, sink logic/source logic switchable 
1 relay (1c-contact) output terminal: NO/NC switchable 
[Terminal functions] Select six of 51 functions. 
Running (RUN), constant-speed reached (FA1), set frequency overreached (FA2), overload notice advance signal (1) 
(OL), output deviation for PID control (OD), alarm signal (AL), set frequency reached (FA3), over-torque (OTQ), 
instantaneous power failure (IP), undervoltage (UV), torque limited (TRQ), operation time over (RNT), plug-in time over 
(ONT), thermal alarm signal (THM), brake release (BRK), braking error (BER), 0 Hz detection signal (ZS), speed 
deviation maximum (DSE), positioning completed (POK), set frequency overreached 2 (FA4), set frequency reached 2 
(FA5), overload notice advance signal (2) (OL2), analog O disconnection detection (Odc), analog OI disconnection 
detection(OIDc), analog O2 disconnection detection(O2Dc), PID feedback comparison (FBV), communication line 
disconnection (NDc), logical operation result 1 (LOG1), logical operation result 2 (LOG2), logical operation result 3 
(LOG3), logical operation result 4 (LOG4), logical operation result 5 (LOG5), logical operation result 6 (LOG6), 
capacitor life warning (WAC), cooling-fan speed drop (WAF), starting contact signal (FR), heat sink overheat warning 
(OHF), low-current indication signal (LOC), general-purpose output 1 (M01), general-purpose output 2 (M02), 
general-purpose output 3 (M03), general-purpose output 4 (M04), general-purpose output 5 (M05), general-purpose 
output 6 (M06), inverter ready (IRDY), forward rotation (FWR), reverse rotation (RVR), major failure (MJA), window 
comparators function 0 (WC0), window comparators function 0I (WC0I), window comparators function 02 (WC02)

Intelligent monitor 

output terminals 

Analog voltage output, analog current output, pulse-string output (e.g., A-F, D-F [n-fold, pulse output only], A, T, V, P) 

Monitoring on display 

Output frequency, output current, output torque, frequency conversion data, trip history, input/output terminal status, 
electric power, and others

Other functions 

Free V/f setting (7 breakpoints), frequency upper/lower limit, jump (center) frequency, acceleration/deceleration 
according to characteristic curve, manual torque boost level/breakpoint, energy-saving operation, analog meter 
adjustment, start frequency setting, carrier frequency adjustment, electronic thermal function (available also for free 
setting), external start/end frequency/frequency rate, analog input selection, retry after trip, restart after instantaneous 
power failure, output of various signals, starting with reduced voltage, overload restriction, initial-value setting, 
automatic deceleration at power failure, AVR function, fuzzy acceleration/deceleration, online/offline auto-tuning, 
high-torque multi-motor operation (sensorless vector control of two motors by one inverter) 

Carrier frequency 
variation 

0.5 to 12 kHz 

Protective functions 

Overcurrent protection, overvoltage protection, undervoltage protection, electronic thermal protection, temperature 
error protection, instantaneous power failure protection, 

phase loss

 input protection, braking-resistor overload 

protection, ground-fault current detection at power-on, USP error, external trip, emergency stop trip, CT error, 
communication error, option board error, and others

Содержание SJ700B SERIES




















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SJ700B SERIES

La Marche A31 Installation And Operation Manual preview
A31
Бренд: La Marche Страницы: 21
CYP CMDPH-2C Operation Manual preview
CMDPH-2C
Бренд: CYP Страницы: 12
Harbor Breeze LS001-W100E2-AA-M4PK1 Quick Start Manual preview
LS001-W100E2-AA-M4PK1
Бренд: Harbor Breeze Страницы: 2
Canary CLE-106X Specifications preview
CLE-106X
Бренд: Canary Страницы: 3
ZIPPER MASCHINEN ZI-STE1000IV User Manual preview
ZI-STE1000IV
Бренд: ZIPPER MASCHINEN Страницы: 100
Icy Box IB-SPL1029AC Manual preview
IB-SPL1029AC
Бренд: Icy Box Страницы: 30
Millennia AD-596 User Manual preview
AD-596
Бренд: Millennia Страницы: 2
Lindy 43246 User Manual preview
43246
Бренд: Lindy Страницы: 2
Lambda LS1291P User Manual preview
LS1291P
Бренд: Lambda Страницы: 47
B&B Electronics McBasic TP/FO Operation Manual preview
McBasic TP/FO
Бренд: B&B Electronics Страницы: 7
Uhlenbrock Elektronik 75900 User Manual preview
75900
Бренд: Uhlenbrock Elektronik Страницы: 4
AV Access 4KCVH2H User Manual preview
4KCVH2H
Бренд: AV Access Страницы: 20
Analog Devices LTC7810ELXE Demo Manual preview
LTC7810ELXE
Бренд: Analog Devices Страницы: 10
Larson Electronics WCDE-6-NL Manual preview
WCDE-6-NL
Бренд: Larson Electronics Страницы: 33
Maplin A10HZ Instruction Manual preview
A10HZ
Бренд: Maplin Страницы: 3
Motrona IP251 Operating Manual preview
IP251
Бренд: Motrona Страницы: 28
Synthrotek MST MIDI to CV Manual preview
MST MIDI to CV
Бренд: Synthrotek Страницы: 5
ELCART 42/12358-00 User Manual preview
42/12358-00
Бренд: ELCART Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды