manualshive.com logo in svg

Hitachi SJ700B SERIES, Инструкция по эксплуатации

Инструкция по эксплуатации для серии Hitachi SJ700B - бесплатно скачать с manualshive.com. Ознакомьтесь с подробным руководством по эксплуатации этого продукта, чтобы оптимизировать его использование. Не упустите возможность загрузить руководство прямо сейчас на manualshive.com.

Поделиться
Скачать
background image

Chapter 4 Explanation of Functions 

 

4 - 94 

4.2.102 Torque LAD stop function 

The torque LAD stop function is effective when "03" (sensorless 
vector control), "04" (0Hz-range sensorless vector control), or 
"05" (vector control with sensor) is specified for the V/F 
characteristic curve selection (A044/A244). This function 
temporarily stops the frequency-based deceleration function 
(LAD) when the torque limitation function operates. 
 

Item 

Function code 

Data or range of data 

Description 

03 

Sensorless vector control 

04 

0Hz-range sensorless vector control 

V/F characteristic 
curve selection 

A044/A244 

05 

Vector control with sensor (not available 
for A244) 

00 

Quadrant-specific setting mode 

01 Terminal-switching 

mode 

02 

Analog input mode 

03 

Option 1 mode 

Torque limit 
selection 

b040 

04 

Option 2 mode 

Torque limit (1) 

b041 

0 to 150 (%)/no 

(disabling torque limitation)

Forward powering (in quadrant-specific 
setting mode) 

Torque limit (2) 

b042 

0 to 150 (%)/no 

(disabling torque limitation)

Reverse regeneration (in quadrant-specific 
setting mode) 

Torque limit (3) 

b043 

0 to 150 (%)/no 

(disabling torque limitation)

Reverse powering (in quadrant-specific 
setting mode) 

Torque limit (4) 

b044 

0 to 150 (%)/no 

(disabling torque limitation)

Forward regeneration (in quadrant-specific 
setting mode) 

00 

Disabling the torque LAD stop function 

Torque limit 
LADSTOP enable 

b045 

01 

Enabling the torque LAD stop function 

40 

Whether to enable torque limitation 

41 

Torque limit switch 1 

Terminal function 

C001 to C008 

42 

Torque limit switch 2 

 

4.2.103 High-torque multi-motor operation 

The high-torque multi-motor operation function allows you to 
make a single inverter operate the two motors (having the 
same specifications) that drive a single load (machine). This 
function is effective when the V/F characteristic curve selection 
is the sensorless vector control or 0Hz-range sensorless 
control. 
To use the function, adjust the inverter settings required for the 
sensorless vector control (see Section 4.2.92) or 0Hz-range 
sensorless control (see Section 4.2.93), except for the motor 
constant settings. Adjust the motor constants as follows: 
1)    For constants R1, R2, and L, specify a value half as large 

as that normally specified for one motor. 

2)    For constant Io, specify a value twice as large as that 

normally specified for one motor. 

3)    For constant J, specify a value half as large as the total 

moment of inertia of the two motors and the load connected 
to them. 

Select the motor capacity that is closest to the collective capacity of both motors. 
If different loads are driven by the two motors operated by the inverter, the load fluctuations on one motor 
may change the other motor's operation status, and the inverter may be unable to normally control the 
motors. Be sure to configure your system so that the motors drive only a single load or multiple loads that 
can, at least, be recognized as a single load. 
 

A044/A244: V/F characteristic curve selection, 
1st/2nd motors 
b040: Torque limit selection 
b041 to b044: Torque limits (1) to (4) 
b045: Torque limit LADSTOP enable 

Related code 

A044/A244: V/F characteristic curve selection, 
1st/2nd motors 
F001: Output frequency setting 
b040: Torque limit selection 
b041 to b044: Torque limits (1) to (4) 
H002/H202: Motor data selection, 1st/2nd motors 
H003/H203: Motor capacity, 1st/2nd motors 
H004/H204: Motor poles setting, 1st/2nd motors   
H005/H205: Motor speed constant, 1st/2nd motors 
H020/H220: Motor constant R1, 1st/2nd motors 
H021/H221: Motor constant R2, 1st/2nd motors 
H022/H222: Motor constant L, 1st/2nd motors 
H023/H223: Motor constant Io, 1st/2nd motors 
H024/H224: Motor constant J, 1st/2nd motors 
H050/H250: PI proportional gain, 1st/2nd motors 
H051/H251: PI integral gain, 1st/2nd motors 
H052/H252: P proportional gain setting, 1st/2nd 
motors 

Related code 

Содержание SJ700B SERIES




















































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SJ700B SERIES

Ramsey Electronics SC1 Manual preview
SC1
Бренд: Ramsey Electronics Страницы: 20
ZIEHL-ABEGG ZETADYN 3BF Technical Information preview
ZETADYN 3BF
Бренд: ZIEHL-ABEGG Страницы: 26
Z3 Technology HE4K-DCK-1X User Instructions preview
HE4K-DCK-1X
Бренд: Z3 Technology Страницы: 86
Patton electronics 222N9 User Manual preview
222N9
Бренд: Patton electronics Страницы: 16
Bang & Olufsen BeoLink Converter NL/ML Installation Manual preview
BeoLink Converter NL/ML
Бренд: Bang & Olufsen Страницы: 45
Transition Networks CGFEB1013-100 User Manual preview
CGFEB1013-100
Бренд: Transition Networks Страницы: 13
Power Fist 8619249 Quick Start Manual preview
8619249
Бренд: Power Fist Страницы: 2
DieHard 28.71495 Operator'S Manual preview
28.71495
Бренд: DieHard Страницы: 24
M-Audio MICRO DAC 24/192 User Manual preview
MICRO DAC 24/192
Бренд: M-Audio Страницы: 2
Linksys LO3040 Specifications preview
LO3040
Бренд: Linksys Страницы: 2
PNI SP1000W User Manual preview
SP1000W
Бренд: PNI Страницы: 24
Ensemble Designs BrightEye 81-F User Manual preview
BrightEye 81-F
Бренд: Ensemble Designs Страницы: 27
StarTech.com ET91000SM20 User Manual preview
ET91000SM20
Бренд: StarTech.com Страницы: 12
Avonic AV-CV160 User Manual preview
AV-CV160
Бренд: Avonic Страницы: 6
Tektronix AWG5000 Series Instructions Manual preview
AWG5000 Series
Бренд: Tektronix Страницы: 12
Danfoss MCA 124 Operating Instructions Manual preview
MCA 124
Бренд: Danfoss Страницы: 57
Nidec Avtron SAFETach III SV850 Instructions Manual preview
Avtron SAFETach III SV850
Бренд: Nidec Страницы: 8
CanadianSolar CSI-5K-S22003-E User Manual preview
CSI-5K-S22003-E
Бренд: CanadianSolar Страницы: 29

Бренды по названию

Популярные бренды

Загрузить еще бренды