Hitachi GX1000-SMC013X, Инструкция по эксплуатации, Страница: 300 / 452

300
show system connections
Description
This command displays the status of network connections, route tables, interfaces.
Input mode
SP user mode and SP administrator mode
Syntax
show system connections [{ipv4|ipv6|sctp|unix}]
Parameters
When this parameter is omitted:
The command displays all connections.
ipv4
Displays only connections using IPv4 addresses.
ipv6
Displays only connections using IPv6 addresses.
sctp
Displays only SCTP connections.
unix
Displays only UNIX connections (sockets).
Display example:
SP01> show system connections
Active Internet connections (servers and established) ...(1)
vrfid Proto Recv-Q Send-Q Local Address Foreign Address State ...(2)
0 tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN
0 tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN
0 tcp 0 0 192.168.100.26:23 192.168.100.100:44629 ESTABLISHED
0 tcp 0 0 192.168.100.26:23 192.168.100.100:44628 ESTABLISHED
0 udp 0 0 0.0.0.0:514 0.0.0.0:*
0 udp 0 0 :::50001 :::*
0 raw 0 0 :::58 :::* 7
0 raw 0 0 fe80::200:e1ff:fe29:142 fe80::3f3:0:* 1
Active UNIX domain sockets (servers and established) ...(3)
Proto RefCnt Flags Type State I-Node Path ...(4)
unix 2 [ ACC ] STREAM LISTENING 2313 /var/run/.xms.default
unix 2 [ ] DGRAM 2315 /tmp/.server.sockname
unix 2 [ ACC ] STREAM LISTENING 2334 /var/tmp/.rtadvd
unix 2 [ ACC ] STREAM LISTENING 2338 /tmp/.zserv
unix 2 [ ACC ] STREAM LISTENING 2348 /tmp/.zebra
unix 2 [ ACC ] STREAM LISTENING 2651 /tmp/sesd.sock
SP01>