Hitachi GX1000-SMC013X Скачать руководство пользователя страница 143

Страница: 143 / 452

143

IPv4 address (

nnn

): 0.0.0.0 to 255.255.255.255

{

<source ipv6>

<length>

| host {

<source ipv6>

| own-address} | any | own-address

<own address length>

| own | range-address

<source ipv6 start>

<source ipv6 end>

}

Specifies the source IPv6 address.

To specify all source IPv6 addresses, specify

any

Default value when this parameter is omitted:

This parameter cannot be omitted.

Range of values:

Specify

<source ipv6>

<length>

own-address

<own address length>

host

<source ipv6>

host own-address

any

own

, or

range-address

<source ipv6

start>

<source ipv6 end>

Specify the source IPv6 address for

<source ipv6>

For

<length>

, specify the part of the IPv6 address that is to meet the

conditions by specifying the number of bits from the start of the address.

For

<own address length>

, specify the part of

own-address

that is to meet the

conditions by specifying the number of bits from the start of the address.

host

<source ipv6>

is specified, the filter condition is an exact match of

<source ipv6>

any

is specified, the source IPv6 address is not used as a filter condition.

own-address

and

own

are valid only for the

traffic-filter

command for a

VLAN interface.

range-address

is valid only for the

traffic-filter

command for an

Ethernet interface or a VLAN interface.

own-address

is specified, the filter condition is the source IPv6 address that

has been set as the IPv6 global address on the target interface.

own

is specified, the filter conditions are the source IPv6 address that has

been set as the IPv6 global address on the target interface and the prefix
length of the IPv6 global address set in

<length>

range-address

is specified, the filter condition is in the range from

<source

ipv6 start>

<source ipv6 end>

Specify IPv6 addresses so that

<source ipv6 end>

is larger than

<source ipv6

start>

<source ipv6>

(nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn:nnnn)

：

0:0:0:0:0:0:0:0

～

ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff

<length>

: 0 to 128

{{eq | neq}

<source port>

| range

<source port start>

<source port end>

}

Specifies a source port number.

This parameter option is available only when the protocol is TCP or UDP.

Default value when this parameter is omitted:

None. (The parameter is not set as a detection condition.)

Range of values:

Specify 0 to 65,535 (in decimal) or a port name.

For details about the port names that can be specified, see Port names that
can be specified for TCP, Port names that can be specified for UDP (IPv4),
and Port names that can be specified for UDP (IPv6).

is specified, the filter condition is an exact match of

<source port>

Содержание GX1000-SMC013X





































































































































































































































































































































































































































































Результаты поиска

Содержание GX1000-SMC013X

Отзывы:

Hitachi GX1000-SMC013X, Инструкция по эксплуатации, Страница: 143 / 452

Результаты поиска

Содержание GX1000-SMC013X

Отзывы: