Hitachi GX1000-SMC013X, Инструкция по эксплуатации, Страница: 190 / 452

190
14.2 SNMP
snmp-server host
Input format
To set or change information:
snmp-server host
<manager address>
[vrf
<vrf id>
] traps
<string>
[version { 1 | 2c | 3 { noauth
| auth | priv } }] [snmp] [{ospf_state | ospf_state_private }] [{ ospf_error |
ospf_error_private }] [bgp] [vrrp] [rmon] [oadp] [air-fan] [power] [login] [memory]
[system-msg] [standby_system] [temperature] [gsrp] [axrp] [frame_error_snd]
[frame_error_rcv] [storm-control] [efmoam] [loop-detection] [cfm] [power-control]
[sp-service]
To delete information:
no snmp-server host
<manager address>
[vrf
<vrf id>
]
Parameters
[snmp] [{ospf_state | ospf_state_private }] [{ ospf_error | ospf_error_private }]
[bgp] [vrrp] [rmon] [oadp] [air-fan] [power] [login] [memory] [system-msg]
[standby_system] [temperature] [gsrp] [axrp] [frame_error_snd] [frame_error_rcv]
[storm-control] [efmoam] [loop-detection] [cfm] [power-control] [sp-service]
By setting each parameter, you can select the traps to be sent. The following table
describes traps that will be sent when parameters are set.
Table 14-2 Correspondence between parameters and traps
Parameter Traps
sp-service
ax6600sSpServiceStartTrap
ax6600sSpServiceStopTrap
sp-service
Sends the traps when a NIF equipped with an SP starts and stops SP services.
1. Default value
A trap is not issued for each parameter.
2. Specifiable value range
snmp, ospf_state
or
ospf_state_private, ospf_error
or
ospf_error_private,
bgp, vrrp, rmon, oadp, air-fan, power, login, memory, system-msg,
standby_system, temperature, gsrp, axrp, frame_error_snd,
frame_error_rcv, storm-control, efmoam, loop-detection, cfm,
power-control,
and
sp-service