Hitachi GX1000-SMC013X Скачать руководство пользователя страница 171 | Manualshive

Страница: 171 / 452

Hitachi GX1000-SMC013X Скачать руководство пользователя страница 171

171

policy-list default-init-interval

Specifies the period of time to temporarily suspend the monitoring of forwarding availability
of policy-based routing when, for example, the device starts. During this period of time,
packets subject to policy-based routing are discarded.

Input format

To set or change information:

policy-list default-init-interval

<seconds>

To delete information:

no policy-list default-init-interval

Input mode

(config)

Parameters

<seconds>

Specifies the period of time (seconds) to suspend the monitoring of forwarding
availability.

1.

Default value when this parameter is omitted:

This parameter cannot be omitted.

2.

Range of values:

1 to 3,600

Default behavior

The monitoring of forwarding availability is suspended for 200 seconds.

Impact on communication

None

When the change is applied

The change is applied when the command is set.

Notes

1.

Make sure that the specified period of time to temporarily suspend the monitoring of
forwarding availability is longer than the value specified for the

track-object

default-init-interval

command for the tracking functionality for policy-based

routing.

2.

If you use this command to change the period of time when the monitoring of
forwarding availability is suspended, monitoring restarts after the new period of time
minus the elapsed time has passed.

Related commands

policy-list

«
...
169
170
171
172
173
...
»

Содержание GX1000-SMC013X





































































































































































































































































































































































































































































Отзывы:

Нет отзывов