Hitachi GX1000-SMC013X, Инструкция по эксплуатации

Страница: 12 / 452

12
If anything seems wrong, turn off the power immediately.
If smoke or an unusual smell is emanating from the Device, or if liquid is spilled into
the Device or a foreign object falls into the Device, immediately turn off power to the
Device as described below. Continuing operation could result in a fire or electric
shock.
If the Device has an AC power supply unit, turn off the Device, and then
unplug the power cable.
Do not place the Device in a place where it is unstable.
If you place the Device on a desk, lay it on its side on a workbench capable of
withstanding the weight of the Device. Placing the Device in an unstable location, such
as on an unsteady or inclined surface, might cause the Device to fall, resulting in
serious injury to yourself and others.
Do not remove the Device cover.
Do not remove the Device cover. Doing so could result in electric shock.
Do not allow any foreign objects inside the Device.
Do not insert or drop any foreign objects, such as anything metallic or flammable,
through the Device's ventilation slots. Doing so could result in a fire or electric shock.
Do not alter the physical makeup of the Device.
Do not alter the physical makeup of the Device. Doing so could result in a fire or
electric shock.
Do not subject the Device to shocks.
In the event that the Device is dropped or any of its components damaged, turn off
the power, unplug the power cable, and contact maintenance personnel. Discontinue
using the cable to avoid the risk of a fire or electric shock.
Do not place anything on the Device.
Do not place any metallic object such as a small pin or paper clip or any container
with a liquid, such as a vase or a flower pot, on the Device. Liquid or metallic objects
falling into the Device could result in a fire or electric shock.
Use the Device only with the indicated power supply setting.
Do not use the Device at any voltage other than the indicated voltage. Doing so
could result in a fire or electric shock.
Ensure that the capacity for incoming current to the distribution board is greater
than the operating current of the circuit breaker.
Ensure that the capacity for incoming current is greater than the operating current of
the circuit breaker. If it is not, the circuit breaker might not operate properly in the event
of a failure, which could result in a fire.