Hirschmann GREYHOUND GRS1020 Скачать руководство пользователя

Страница: 260 / 619

Diagnostics

[ Diagnostics > System > IP Address Conflict Detection ]

259

RM GUI GRS

Release

8.0

09/2019

6.2.4

IP Address Conflict Detection

[ Diagnostics > System > IP Address Conflict Detection ]

Using the

IP Address Conflict Detection

function the device verifies that its IP address is unique in the

network. For this purpose, the device analyzes received ARP packets.

In this dialog you specify the procedure with which the device detects address conflicts and specify

the required settings for this.

The device displays detected address conflicts in the table.

When the device detects an address conflict, the status LED of the device flashes red 4 times.

Operation

Enables/disables the

IP Address Conflict Detection

function.

Possible values:



(default setting)

The

IP Address Conflict Detection

function is enabled.

The device verifies that its IP address is unique in the network.



Off

The

IP Address Conflict Detection

function is disabled.

Configuration

Detection mode

Specifies the procedure with which the device detects address conflicts.

Possible values:



active and passive

(default setting)

The device uses active and passive address conflict detection.



active

Active address conflict detection. The device actively helps avoid communicating with an IP

address that already exists in the network. The address conflict detection begins as soon as you

connect the device to the network or change its IP parameters.

–

The device sends 4 ARP probe data packets at the interval specified in the

Detection delay

[ms]

field. If the device receives a response to these data packets, then there is an address

conflict.

–

If the device does not detect an address conflict, then it sends 2 gratuitous ARP data packets

as an announcement. The device also sends these data packets when the address conflict

detection is disabled.

–

If the IP address already exists in the network, then the device changes back to the

previously used IP parameters (if possible).

If the device receives its IP parameters from a DHCP server, then it sends a DHCPDECLINE

message back to the DHCP server.

Содержание GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды

Hirschmann GREYHOUND GRS1020, Справочное руководство

Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды