Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 527 / 619

Operation diagnosis
13.1 Sending SNMP traps
187
UM Config GRS
Release 8.0 09/2019
13.1.1 List of SNMP traps
The following table displays possible SNMP traps sent by the device.
Table 31: Possible SNMP traps
Name of the SNMP trap Meaning
authenticationFailure When a station attempts to access an agent without
authorisation, this trap is sent.
coldStart Sent after a restart.
hm2DevMonSenseExtNvmRemova
l
When the external memory has been removed, this trap is sent.
linkDown When the connection to a port is interrupted, this trap is sent.
linkUp When connection is established to a port, this trap is sent.
hm2DevMonSensePSState When the status of a power supply unit changes, this trap is sent.
hm2SigConStateChange When the status of the signal contact changes in the operation
monitoring, this trap is sent.
newRoot When the sending agent becomes the new root of the spanning
tree, this trap is sent.
topologyChange When the port changes from blocking to forwarding or from
forwarding to blocking , this trap is sent.
alarmRisingThreshold When the RMON input exceeds its upper threshold, this trap is
sent.
alarmFallingThreshold When the RMON input goes below its lower threshold, this trap
is sent.
hm2AgentPortSecurityViolat
ion
When a MAC address detected on this port does not match the
current settings of the parameter
hm2AgentPortSecurityEntry , this trap is sent.
hm2DiagSelftestActionTrap When a self test for the four categories “task”, “resource”,
“software”, and “hardware” is performed according to the
configured settings, this trap is sent.
hm2MrpReconfig When the configuration of the MRP ring changes, this trap is
sent.
hm2DiagIfaceUtilizationTra
p
When the threshold of the interface exceeds or undercuts the
upper or lower threshold specified, this trap is sent.
hm2LogAuditStartNextSector When the audit trail after completing one sector starts a new
one, this trap is sent.
hm2ConfigurationSavedTrap After the device has successfully saved its configuration locally,
this trap is sent.
hm2ConfigurationChangedTra
p
When you change the configuration of the device for the first
time after it has been saved locally, this trap is sent.
hm2PlatformStpInstanceLoop
InconsistentStartTrap
When the port in this STP instance changes to the “loop
inconsistent” status, this trap is sent.
hm2PlatformStpInstanceLoop
InconsistentEndTrap
When the port in this STP instance leaves the “loop inconsistent”
status receiving a BPDU packet, this trap is sent.