Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 397 / 619

Access to the device
3.1 Authentication lists
57
UM Config GRS
Release 8.0 09/2019
3.1.4 Adjust the settings
Example:
Set up a separate authentication list for the application WebInterface which is by default included
in the authentication list defaultLoginAuthList . The device forwards authentication requests to
a RADIUS server in the network. As a fall-back solution, the device authenticates users using the
local user management.
Perform the following steps:

Create an authentication list loginGUI .

Select the policies for the authentication list loginGUI .

Assign an application to the authentication list loginGUI .

Open the Device Security > Authentication List dialog.

Click the button.
The dialog displays the Create window.

Enter a meaningful name in the Name field.
In this example, enter the name loginGUI .

Click the Ok button.
The device adds a new table entry.
enable Change to the Privileged EXEC mode.
configure Change to the Configuration mode.
authlists add loginGUI Creates the authentication list
loginGUI
.

In the Policy 1 column, select the value radius .

In the Policy 2 column, select the value local .

In the Policy 3 to Policy 5 columns, select the value reject to help prevent further fall-back.

In the Active column, mark the checkbox.

To save the changes temporarily, click the button.
authlists set-policy loginGUI radius
local reject reject reject
Assigns the policies
radius
,
local
and
reject
to the
authentication list
loginGUI
.
show authlists
Displays the authentication lists that are set up.
authlists enable loginGUI
Activates the authentication list
loginGUI
.

In the Device Security > Authentication List dialog, highlight the authentication list loginGUI .

Click the button and then the Allocate applications item.
The dialog displays the Allocate applications window.

In the left column, highlight the application WebInterface .