Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 84 / 619

Device Security
[ Device Security > Management Access > Server ]
83
RM GUI GRS
Release 8.0 09/2019
Start
Copies the key specified in the URL field to the device.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13 .
[ HTTP ]
This tab lets you enable/disable the HTTP protocol for the web server and specify the settings
required for HTTP.
The web server provides the Graphical User Interface via an unencrypted HTTP connection. For
security reasons, disable the HTTP protocol and use the HTTPS protocol instead.
The device supports up to 10 simultaneous connections using HTTP or HTTPS.
Note: If you change the settings in this tab and click the button, then the device ends the session
and disconnects every opened connection. To continue working with the Graphical User Interface,
login again.
Operation
Operation
Enables/disables the HTTP protocol for the web server.
Possible values:

On (default setting)
The HTTP protocol is enabled.
The access to the device management is possible through an unencrypted HTTP connection.
When the HTTPS protocol is also enabled, the device automatically redirects the request for a
HTTP connection to an encrypted HTTPS connection.

Off
The HTTP protocol is disabled.
When the HTTPS protocol is enabled, the access to the device management is possible through
an encrypted HTTPS connection.
Note:
If the HTTP and HTTPS protocols are disabled, then you can enable the HTTP protocol using
the Command Line Interface command
http server
to get to the Graphical User Interface.
Configuration
TCP port
Specifies the number of the TCP port on which the web server receives HTTP requests from clients.