Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 53 / 619

Basic Settings
[ Basic Settings > Restart ]
52
RM GUI GRS
Release 8.0 09/2019
1.8 Restart
[ Basic Settings > Restart ]
This dialog lets you restart the device, reset port counters and address tables, and delete log files.
Restart
Restart in
Displays the remaining time until the device restarts.
To update the display of the remaining time, click the button.
Cancel
Aborts a delayed restart.
Cold start...
Opens the Restart dialog to initiate an immediate or delayed restart of the device.
If the configuration profile in the volatile memory ( RAM ) and the "Selected" configuration profile in
the non-volatile memory ( NVM ) differ, then the device displays the Warning dialog.

To permanently save the changes, click the Yes button in the Warning dialog.

To discard the changes, click No in the Warning dialog.

In the Restart in field you specify the delay time for the delayed restart.
Possible values:
– 00:00:00..596:31:23 (default setting: 00:00:00 )
When the delay time elapsed, the device restarts and goes through the following phases:

If you activate the function in the Diagnostics > System > Selftest dialog, then the device performs
a RAM test.

The device starts the device software that the Stored version field displays in the Basic Settings >
Software dialog.

The device loads the settings from the "Selected" configuration profile. See the Basic Settings >
Load/Save dialog.
Note:
During the restart, the device does not transfer any data. During this time, the device cannot
be accessed by the Graphical User Interface or other management systems.
Buttons
You find the description of the standard buttons in section “Buttons” on page 13 .
Reset MAC address table
Removes the MAC addresses from the forwarding table that have in the Switching > Filter for MAC
Addresses dialog the value learned in the Status column.