Hirschmann GREYHOUND GRS1020 Скачать руководство пользователя страница 201

Страница: 201 / 619

Switching

[ Switching > L2-Redundancy > MRP ]

200

RM GUI GRS

Release

8.0

09/2019

Possible values:



forwarding

The port is enabled, connection exists.



blocked

The port is blocked, connection exists.



disabled

The port is disabled.



not-connected

No connection exists.

Fixed backup

Activates/deactivates the backup port function for the

Ring port 2

Note:

The switch over to the primary port can exceed the maximum ring recovery time.

Possible values:



marked

The

Ring port 2

backup function is active. When the ring is closed, the ring manager reverts back

to the primary ring port.



unmarked

(default setting)

The

Ring port 2

backup function is inactive. When the ring is closed, the ring manager continues

to send data on the secondary ring port.

Configuration

Ring manager

Enables/disables the

Ring manager

function.

If there is one device at each end of the line, then you activate this function.

Possible values:



The

Ring manager

function is enabled.

The device operates as a ring manager.



Off

(default setting)

The

Ring manager

function is disabled.

The device operates as a ring client.

Advanced mode

Activates/deactivates the advanced mode for fast recovery times.

Possible values:



marked

(default setting)

Advanced mode active.

MRP-capable Hirschmann devices support this mode.



unmarked

Advanced mode inactive.

Select this setting if another device in the ring does not support this mode.

Содержание GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды

Hirschmann GREYHOUND GRS1020, Справочное руководство

Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды