Hirschmann GREYHOUND GRS1020 Скачать руководство пользователя страница 218

Страница: 218 / 619

Switching

[ Switching > L2-Redundancy > Link Aggregation ]

217

RM GUI GRS

Release

8.0

09/2019



down

(

lag/…

row)

The LAG interface is down.



down

The physical port is disabled.

No cable connected or no active link.

Active

Activates/deactivates the LAG interface.

Possible values:



marked

(default setting)

The LAG interface is active.



unmarked

The LAG interface is inactive.

STP active

Activates/deactivates the

Spanning Tree

protocol on this LAG interface. The prerequisite is that you

enable the

Spanning Tree

function globally in the

Switching > L2-Redundancy > Spanning Tree > Global

dialog.

You can also activate/deactivate the

Spanning Tree

protocol on the LAG interfaces in the

Switching >

L2-Redundancy

> Spanning Tree > Port

dialog.

Possible values:



marked

(default setting)

The

Spanning Tree

protocol is active on this LAG interface.



unmarked

The

Spanning Tree

protocol is inactive on this LAG interface.

Static link aggregation

Activates/deactivates the

Static link aggregation

function on the LAG interface. The device

aggregates the assigned physical ports to the LAG interface, even if the remote site does not

support LACP.

Possible values:



marked

The

Static link aggregation

function is active on this LAG interface. The device aggregates an

assigned physical port to the LAG interface as soon as the physical port gets a link. The device

does not send LACPDUs and discards received LACPDUs.



unmarked

(default setting)

The

Static link aggregation

function is inactive on this LAG interface. If the connection was

successfully negotiated using LACP, then the device aggregates an assigned physical port to

the LAG interface.

Active ports (min.)

Specifies the minimum number of physical ports to be active for the LAG interface to stay active. If

the number of active physical ports is lower than the specified value, then the device deactivates

the LAG interface.

If a redundancy function like

Spanning Tree

is active in the device, then you use this function to force

the device to switch automatically to the redundant line.

Содержание GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды

Hirschmann GREYHOUND GRS1020, Справочное руководство

Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды