Hirschmann GREYHOUND GRS1020, Справочное руководство

Страница: 402 / 619

Access to the device
3.2 User management
62
UM Config GRS
Release 8.0 09/2019
3.2.4 Changing default passwords
To help prevent undesired access, change the password of the default user accounts.
Perform the following steps:

Change the passwords for the admin and user user accounts.

Open the Device Security > User Management dialog.
The dialog displays the user accounts that are set up.

To obtain a higher level of complexity for the password, mark the checkbox in the Policy
check column.
Before saving it, the device checks the password according to the policy specified in the
Password policy frame.
Note: The password check can lead to a message in the Security status frame in the Basic
Settings > System dialog. You specify the settings that cause this message in the Basic
Settings > System dialog.

Click the row of the relevant user account in the Password field. Enter a password of at least
6 characters.
Up to 64 alphanumeric characters are allowed.

The device differentiates between upper and lower case.

The minimum length of the password is specified in the Configuration frame. The device
constantly checks the minimum length of the password.

To save the changes temporarily, click the button.
enable Change to the Privileged EXEC mode.
configure Change to the Configuration mode.
users password-policy-check <user>
enable
Activates the checking of the password for the
<user>
user account based on the specified policy.
In this way, you obtain a higher level of complexity
for the password.
Note:
When you display the security status, the password check can lead to a message (
show
security-status all
). You specify the settings that cause this message with the command
security-status monitor pwd-policy-inactive
.
users password <user> SECRET Specifies the password
<user>
for the
SECRET
user
account. Enter at least 6 characters.
save Save the settings in the non-volatile memory (
nvm
)
in the “selected” configuration profile.