Hirschmann GREYHOUND GRS1020 Скачать руководство пользователя страница 70

Страница: 70 / 619

Device Security

[ Device Security > User Management ]

RM GUI GRS

Release

8.0

09/2019

Possible values:



unauthorized

The user is blocked, and the device rejects the user log on.

Assign this value to temporarily lock the user account. If the device detects an error when

another role is being assigned, then the device assigns this role to the user account.



guest

(default setting)

The user is authorized to monitor the device.



auditor

The user is authorized to monitor the device and to save the log file in the

Diagnostics > Report >

Audit Trail

dialog.



operator

The user is authorized to monitor the device and to change the settings – with the exception of

security settings for device access.



administrator

The user is authorized to monitor the device and to change the settings.

The device assigns the Service Type transferred in the response of a RADIUS server as follows to

a user role:

•

Administrative-User

administrator

•

operator

•

NAS-Prompt-User

guest

User locked

Unlocks the user account.

Possible values:



marked

The user account is locked. The user has no access to the device management.

If the user makes too many unsuccessful log in attempts, then the device automatically locks

the user.



unmarked

(grayed out) (default setting)

The user account is unlocked. The user has access to the device management.

Policy check

Activates/deactivates the password check.

Possible values:



marked

The password check is activated.

When you set up or change the password, the device checks the password according to the

policy specified in the

Password policy

frame.



unmarked

(default setting)

The password check is deactivated.

SNMP auth type

Specifies the authentication protocol that the device applies for user access via SNMPv3.

Содержание GREYHOUND GRS1020












































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды

Hirschmann GREYHOUND GRS1020, Справочное руководство

Результаты поиска

Содержание GREYHOUND GRS1020

Отзывы:

Похожие инструкции для GREYHOUND GRS1020

Бренды по названию

Популярные бренды