Technical Data
156/223
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM46EN | Revision 46 | English | 2015-12 | Relelased | Public
© Hilscher, 2008-2015
10.4.4 EtherNet/IP Adapter (Slave)
Parameter
Description
Maximum number of input data
504 bytes
Maximum number of output data
504 bytes
IO connection types (implicit)
1 exclusive owner, 1 listen only, 1 input only
IO Connection trigger types
Cyclic, minimum 1 ms*
Application Triggered, minimum 1 ms*
Change Of State, minimum 1 ms*
* depending on number of connections and number of input and
output data
Explicit Messages
Connected and unconnected
Maximum number of connections
8, explicit and implicit connections
Unconnected Message Manager (UCMM)
Supported
Quick connect
Supported
Predefined standard objects
Identity Object
Message Route Object
Assembly Object
Connection Manager
DLR Object
QoS Object
TCP/IP Object
Ethernet Link Object
Reset services
Identity Object Reset Service of Type 0 and 1
Maximum number of user specific objects
20
DLR V2 (ring topology)
Supported
ACD (Address Conflict Detection)
Supported
DHCP Supported
BOOTP Supported
Baud rates
10 and 100 MBit/s
Duplex modes
Half duplex, Full duplex, Auto negotiation
MDI modes
MDI, MDI-X, Auto-MDIX
Data transport layer
Ethernet II, IEEE 802.3
Switch function
Integrated
Limitations
CIP Sync Services are not implemented
TAGs are not supported
Reference to firmware/stack version
V2.7.x.x
Table 123: Technical Data EtherNet/IP Adapter (Slave) Protocol
