Hardware Installation and Uninstalling
78/223
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM46EN | Revision 46 | English | 2015-12 | Relelased | Public
© Hilscher, 2008-2015
8. Plug the connecting cable to the Master or Slave.
"
Note for the PC card CIFX 70E-RE, CIFX 70E-RE\MR or CIFX 100EH-
RE\CUBE:
Note:
The RJ45 socket is only for use in LAN, not for telecommuni-cation circuits. For
further information refer to section
Ethernet Interface
on page 105.
"
Plug the connecting cable from the PC card cifX to the PC card Master
or Slave.
9. Connect the PC or the connecting device to the power supply and
switch it on.
"
Connect the PC or the connecting device to the power supply.
"
Switch on the PC or the connecting device.
6.5 Uninstalling the PC Card cifX PCI, PCIe, Low Profile PCIe
1. Take safety precautions.
Lethal Electrical Shock caused by parts with more than 50V!
"
Disconnect the power plug of the PC or of the connecting device.
"
Make sure, that the power supply is off at the PC or at the connecting
device.
Electrostatically sensitive Devices
"
To prevent damage to the PC and the PC card cifX, make sure, that the
PC card cifX is grounded via the endplate and the PC and make sure,
that you are discharged when you install/uninstall the PC card cifX.
2. Remove the connecting cable to the Master or Slave.
"
Remove the connecting cable between the PC card cifX to be replaced
and the PC card Master or Slave.
3. Open
cabinet.
"
Open the cabinet of the PC or of the connecting device.
4. Uninstall PC card cifX.
"
Loosen the PC card cifX.
"
Remove the PC card cifX from the
PCI
slot or from the
PCI express
slot.
After this:
5. Close
cabinet.
"
Close the cabinet of the PC or connecting device.
.