Descriptions and Requirements
32/223
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM46EN | Revision 46 | English | 2015-12 | Relelased | Public
© Hilscher, 2008-2015
PC Cards PCI and PCI Express with two Channels:
PC Card cifX
From Hardware
Revision
Firmware File
Protocol
From Firmware
Version
CIFX2DPM.NXF
PROFIBUS DP Master, 2 Kanäle
1.0.x.x (new version
counting)
CIFX 50-2DP
1
CIFX2DPS.NXF
PROFIBUS DP Slave, 2 Kanäle
1.0.x.x (new version
counting)
C0201040.NXF
PROFIBUS DP Master, 1 Channel
+ CANopen Master, 1 Channel
1.0.x.x
CIFX 50-2DP\CO
1
C0202050.NXF
PROFIBUS DP Slave, 1 Channel
+ CANopen Slave, 1 Channel
1.0.x.x
C0201060.NXF
PROFIBUS DP Master, 1 Channel
+ DeviceNet Master, 1 Channel
1.0.x.x
CIFX 50-2DP\DN
1
C0205070.NXF
PROFIBUS DP Slave, 1 Channel
+ DeviceNetSlave, 1 Channel
1.0.x.x
C0204040.NXF
CANopen Master, 2 Channels
1.0.x.x
C0204050.NXF
CANopen Master, 1 Channel
+ CANopen Slave, 1 Channel
1.0.x.x
CIFX 50-2CO
1
C0205050.NXF
CANopen Slave, 2 Channels
1.0.x.x
C0204060.NXF
CANopen Master, 1 Channel
+ DeviceNet Master, 1 Channel
1.0.x.x
CIFX 50-2CO\DN
1
C0205070.NXF
CANopen Slave, 1 Channel
+ DeviceNet Slave, 1 Channel
1.0.x.x
C0206060.NXF
DeviceNet Master, 2 Channels
1.0.x.x
CIFX 50-2DN
1
C0207070.NXF
DeviceNet Slave, 2 Channels
1.0.x.x
CIFX 50-2ASM,
CIFX 50E-2ASM
2
4
CIFX2ASM.NXF
AS-Interface Master, 2 Channels
2.1.x.x
Table 19: Firmware Versions for the DMA Mode (for 2 Channel Systems)
Driver and Software
Version or higher
cifX Device Driver
cifX Device Driver Setup.exe
0.95x
SYCON.net
SYCONnet netX setup.exe
V1.201.x.x
Table 20: Versions Driver and SYCON.net for the DMA Mode
3.7 PC Cards cifX with additional MRAM
The PC cards CIFX 70E-XX\MR (CIFX 70E-RE\MR, CIFX 70E-DP\MR,
CIFX 70E-CO\MR and CIFX 70E-DN\MR) are identical to the PC cards
CIFX 70E-XX and work with the same firmware. However, the PC cards
CIFX 70E-XX\MR have an additional memory module for storing remanent
data, MRAM with 128Kbyte (= 64K words). Using the cifX Device Driver
(from Version 1.1.1.0) access from the application program to this memory
is possible and it can be used as a remanent memory for the host system.
