Descriptions and Requirements
31/223
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM46EN | Revision 46 | English | 2015-12 | Relelased | Public
© Hilscher, 2008-2015
3.6 The Function „DMA Mode“
Device revisions which provide
DMA Mode
are listed separately in section
Note:
The functions
Slot Number (Card ID)
and
DMA Mode
are in
technical view independently from each other.
The
DMA Mode
is activated via the device driver
cifX Device Driver
.
For further information refer to the user manual
Software Installation for
the PC Cards cifX
in section
Activating DMA Mode in the cifX Device Driver
Setup
.
Requirements
For device revisions providing the
DMA Mode
the required versions of the
firmware, the driver and the SYCON.net setup must be used:
PC Cards with one Channel:
PC Card cifX
From Hardware
Revision
Firmware File
Protocol
From Firmware
Version
CIFXECM.NXF EtherCAT
Master
2.4.6.0
CIFXECS.NXF EtherCAT
Slave
2.5.5.0
CIFXEIM.NXF EtherNet/IP Scanner
2.2.x.x
CIFXEIS.NXF EtherNet/IP
Adapter
2.3.x.x
CIFXOMB.NXF Open-Modbus/TCP
2.4.x.x
CIFXPLS.NXF
POWERLINK Controlled Node
2.1.24.0
CIFXPNM.NXF PROFINET
IO
Controller
2.3.x.x
CIFXPNS.NXF
PROFINET IO Device
3.4.x.x (V3)
CIFXS3M.NXF
sercos Master
2.0.15.0
CIFXS3S.NXF
sercos Slave
3.0.15.0
CIFX 50-RE,
CIFX 50-RE\ET,
CIFX 50E-RE,
CIFX 50E-RE\ET,
CIFX 70E-RE,
CIFX 70E-RE\MR,
CIFX 100EH-
RE\CUBE
1
1
4
1
1
1
1
CIFXVRS.NXF VARAN
Client 1.0.x.x
CIFXDPM.NXF
PROFIBUS DP Master
2.3.x.x
CIFXDPS.NXF
PROFIBUS DP Slave
2.3.x.x
CIFX 50-DP,
CIFX 50E-DP,
CIFX 70E-DP,
CIFX 70E-DP\MR
1
4
1
1
CIFXMPI.NXF
PROFIBUS MPI Device
not supported
CIFXCOM.NXF
CANopen Master
2.3.x.x
CIFX 50-CO,
CIFX 50E-CO,
CIFX 70E-CO,
CIFX 70E-CO\MR
1
4
1
1
CIFXCOS.NXF CANopen
Slave
2.3.x.x
CIFXDNM.NXF
DeviceNet Master
2.2.x.x
CIFX 50-DN,
CIFX 50E-DN,
CIFX 70E-DN,
CIFX 70E-DN\MR
1
4
1
1
CIFXDNS.NXF
DeviceNet Slave
2.2.x.x
CIFX 50-CC,
CIFX 50E-CC
1
3
CIFXCCS.NXF CC-Link
Slave
2.4.x.x
Table 18: Firmware Versions for the DMA Mode (for 1 Channel Systems)
