107
Figure 6-11
6.5.2.7 Volume
The volume screen is used to view and adjust the volume of each analog channel.
The steps are as follows:
Step 1:
In the main interface, click " Configuration
→
Camera
→
Volume" to enter the
volume setting interface, as shown in Figure 6-12.
Step 2:
Select the configuration channel, check the mute check box or slide the
slider of the volume to adjust the size of the audio output.
Step 3:
Click "Save" to complete the setup.
Figure 6-12
6.5.2.8 Privacy Mask
In the main interface, click " Configuration
→
Camera
→
Privacy Mask " to enter the
privacy mask setting interface, as shown in Figure 6-13. Here you can view and set
the privacy of the channel area settings and other related information, the relevant
parameters are consistent with the XVR-side settings.