84
Network Exception
The steps are as follows:
Step 1:
On the menu page, select "Configuration →Exceptions → Network
Exception" to enter the network exception setting interface, as shown in
Figure 5-45.
Step 2:
Select the event type, click "Enable", and enable the sending of mail
and buzzer alarm.
Step 3:
Click "Apply" to save the configuration.
Figure 5-45
Event type:
Including Broken network and IP conflict in two cases.
Enable:
Turns on / off network exception alarm.
Screen display:
Turns on / off the screen display when the device is alarmed.
Send e-mail:
Turns on / off the sending mail function that occurs when a
network exception, send mail to the specified mailbox.
Buzzer alarm:
Turn on / off the device buzzer alarm function, that is, the
buzzer sounds when a network error occurs.
5.3.6.5 User
On the menu page, select "Configuration→ User" to enter the user
management interface, as shown in Figure 5-46. The XVR user management
can add, modify, and delete users.
Instruction
The factory default administrator admin group, administrator user
admin user, admin group and admin user can not delete or modify their
permissions.
Users in the group can modify permissions in this group of permissions.
Each user must belong to only one group. When you select the group to
which the user belongs, the user's authority can only be a subset of the
group's authority. The authority attribute of the group cannot be
exceeded.