78
the external network IP address to directly access the XVR device on the
intranet.
Prerequisites
1) Log in to the router and set the IP address of the router's WAN port to
access the external network.
2) Make sure that the router is a first-level router (or virtual first-level router)
and turn on the UPnP function.
3) Connect the device to the LAN port of the router and access the private
network.
4) In the main menu, select "Configuration → Network → IP/Port", set "IP
address" as the router's private IP (for example: 192.168.1.101) or select
"DHCP" to obtain the IP address automatically.
The steps are as follows:
Step 1:
On the main menu page, click "Configuration → Network → UPnP" to
enter the UPnP interface, as shown in Figure 5-39 below.
Step 2:
Enable the UPnP function and configure related parameters such as
intranet IP, external IP, and port mapping information of the UPnP route.
Step 3:
Click "Apply" to save the configuration.
Figure 5-39
Enable:
Turn on/off the device UPnP function.
State:
Displays the mapping status of UPnP.
Internal IP:
Enter the router's LAN port address. After the mapping is
successful, the IP address will be automatically obtained without
setting.
