64
Figure 5-27
Channel:
Select the channel with PTZ camera access.
Protocol:
Select the PTZ protocol for the access device brand model (eg
PelcoD).
Address:
Set the address to access the PTZ. The default is 0.
Baud Rate:
Select the baud rate used to access the PTZ to control the
PTZ and camera of the corresponding channel. The default is 2400.
Data Bit:
The default value is 8.
Stop Bit:
The default value is 1.
Check:
The default value is NONE.
Copy:
After the channel is set up, click "Copy" to apply the setting to
another channel.
5.3.5.8 Privacy Mask
Privacy Mask
Privacy Mask is used to set the video occlusion of the video source. On the
menu page, click "Camera → Privacy Mask" to enter the Privacy Mask
interface, as shown in Figure 5-28.
Figure 5-28
Channel:
Select the channel.
