20
Chapter 4 XVR Startup
4.1 System Initialization
The steps to turn on XVR are as follows:
○
1 Connect the device to the analog camera, monitor and plug in the
mouse and power cord.
○
2 Turn on the power switch on the rear panel to start the device. The
system initialization screen appears, as shown in Figure 4-1.
Figure 4-1
Instruction
Please confirm that the voltage to be connected matches the XVR
requirements and ensure that the XVR ground is well grounded.
If the power supply is abnormal, the XVR may not work properly or even
damage the XVR. It is recommended to use a regulated power supply
for power supply.
The illustrations that appear in the operation manual may not be exactly
the same as the menu interface displayed on your monitor, so all
illustrations are for user's reference only.
After the device starts up, it can be simply configured through the boot
wizard, which is the normal operation of the device.
