80
Step 1:
On the menu page, select "Configuration → Network → PPPOE" to
enter the PPPOE configuration interface, as shown in Figure 5-40 below.
Figure 5-40
Step 2:
Select "Enable", input the user name and password of the PPPoE.
Step3:
Click "Apply" to save the configuration.
After the PPPoE configuration is successful, the obtained public IP address is
displayed in real time. Users can access the device through this IP address.
Enable:
Turn on/off the device PPPoE function.
Server Name:
The PPPoE user name provided by the ISP (Internet
Service Provider).
Password:
The password corresponding to the user name.
IP Address
：
After successful PPPoE dialing, and the device is accessed
through the IP address.
Net mask:
After successful PPPoE dialing, he obtained public network
subnet mask is displayed here.
Instruction
After the configuration is complete, the IP address of the TCP/IP
interface cannot be modified.
Cloud Storage
Set cloud storage. When the device triggers an alarm, it can store the
captured alarm image of the device on the cloud server.
Prerequisites
1) You need to have a Dropbox or Google Cloud Storage account.
2) Using this function, the device must be connected to an external network;
otherwise it will not work properly.
