62
Figure 5-25
PTZ setup interface is used to set the PTZ direction, speed and lens zoom,
focus and aperture settings and cruise settings shortcut button.
Channel:
Select the channel where the dome camera is connected to
the XVR.
Zoom:
Adjust the camera magnification by
/
key, long-range /
wide-angle function.
Focus:
Use the
/
key, zoom in/out function, adjust the camera
to focus.
Iris:
Use the
/
key, zoom in / out the aperture function, adjust
the aperture of the camera.
Speed:
It is mainly used to set the pan/tilt rotation speed operation. For
example, the rotation speed in step 7 is much greater than the rotation
speed in step size 1.
Preset setting:
Through the direction of the button to turn the PTZ to
the desired location, and then click the preset button below the "set"
button to complete the preset point settings.
Cruise setting
:
Select the cruise line and click the "
" button to select
the preset number, dwell time (seconds) and cruise speed in the "Curise
Setup" interface, Shown in Figure 5-26, Click the "Confirm" button to
return to the cruise settings interface and click "Cruise on" again to save
the settings and make the device start cruising.