30
Instruction
Filter Search Add Device: In the Add Device interface, select the
corresponding protocol in the "Filter" column
→
"Search"
→
Select
Device
→
Click "Add".
Manual Add: On the Add Device screen, click "Manual add"
→
Click
"Enable check box"
→
Select Protocol, Preview Stream, Enter Password,
IP, Port
→
click "Save".
The IP channel only supports the quick add function.
4.5 Channel shortcut menu
After adding a device to a channel, click the channel. The shortcut menu
appears as shown in Figure 4-9.
Figure 4-9
The function of each icon is shown in the following table:
Icon
Function
The current channel access signal is an analog signal.
The current channel access signal is a "CVI" signal.
The current channel access signal is a "AHD" signal.
The current channel access signal is a "CVBS" signal.
The current channel access signal is a "TVI" signal.
The current channel access signal is "IPC", which is a
network camera.
Instant playback button, click the button, the channel
playback 5 minutes before the video.
Audio output control button, click to set the channel
output volume and mute.
Electronic zoom button, click to open the electronic
zoom function, press and hold the left mouse button to
select the zoom area, release the mouse, the preview
