49
Device Type:
SATA.
Refresh:
Click update disk list information.
Format:
Formatting the HDD, select the HDD
→
click the "Format"
button
→
click the "Confirm" button.
Instruction
"Not connecting disk" indicates that the device is not connected or the
hard disk is not detected.
The hard disk information is displayed on the HDD interface when the
hard disk is used normally.
The hard disk must be formatted first when the hard disk is connected
to the XVR for the first time or when "Not formatted" is displayed.
The device does not need to format the hard disk when the hard disk
status shows "In use".
After formatting the hard disk, restart the XVR to takes effect.
5.3.4 Record
5.3.4.1 Schedule
In the main menu, click "Record" to enter the recording setting interface.
After setting the recording schedule, the system will automatically perform
the corresponding type of recording according to the set planning time. The
recording setting interface is shown in Figure 5-15:
Figure 5-15
